基于LMD频域近似熵频谱感知算法研究

针对现有频域近似熵频谱感知技术在低信噪比条件下抗噪声性能和检测性能有待提升的问题,提出了一种基于LMD频域近似熵的频谱感知算法。(1)算法筛选出3个PF分量累加求和,使得算法提取局部调频包络特征信息得到最优,进一步排除噪声不确定度的影响。(2)算法对累加PF分量进行频域变换后求其近似熵,增强算法对频域信息的嗅探能力,提升算法检测性能。Monte Carlo仿真结果表明,在噪声不确定度为0dB,采样点数为8 000的情况下,当信噪比大于-19 d B时,可以对2ASK信号达到100%的检测概率,与现有频域近似熵算法相比,检测性能约有17 d B的提升。     

Bullwhip and reverse bullwhip effects under the rationing game

When an unreliable supplier serves multiple retailers, the retailers may compete with each other by inflating their order quantities in order to obtain their desired allocation from the supplier, a behavior known as the rationing game. We introduce capacity information sharing and a capacity reservation mechanism in the rationing game and show that a Nash equilibrium always exists. Moreover, we provide conditions guaranteeing the existence of the reverse bullwhip effect upstream, a consequence of the disruption caused by the supplier. In contrast, we also provide conditions under which the bullwhip effect does not exist. In addition, we show that a smaller unit reservation payment leads to more bullwhip and reverse bullwhip effects, while a large unit underage cost results in a more severe bullwhip effect. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 203–216, 2017     

An absolute approximation algorithm for scheduling unrelated machines

Non‐preemptive scheduling of n independent jobs on m unrelated machines so as to minimize the maximal job completion time is considered. A polynomial algorithm with the worst‐case absolute error of min{(1 ? 1/m)p_max, p} is presented, where p_max is the largest job processing time and p is the mth element from the non‐increasing list of job processing times. This is better than the earlier known best absolute error of p_max. The algorithm is based on the rounding of acyclic multiprocessor distributions. An O(nm²) algorithm for the construction of an acyclic multiprocessor distribution is also presented. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

A heuristic for maximizing the number of on‐time jobs on two uniform parallel machines

We consider the problem of maximizing the number of on‐time jobs on two uniform parallel machines. We show that a straightforward extension of an algorithm developed for the simpler two identical parallel machines problem yields a heuristic with a worst‐case ratio bound of at least . We then show that the infusion of a “look ahead” feature into the aforementioned algorithm results in a heuristic with the tight worst‐case ratio bound of , which, to our knowledge, is the tightest worst‐case ratio bound available for the problem. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于支持向量机的飞机备件需求预测

支持向量机是一种机器学习算法,在国外已广泛应用于工程实践领域。首先探讨了支持向量机回归预测模型的学习和预测机制,分析其中三个重要参数对算法的影响规律,得出一套定性的参数选择方法,然后将支持向量机引入到装备综合保障分析之中,构建了飞机备件智能预测模型,并对某型军用飞机备件需求进行了预测和分析,结果表明:基于支持向量机的备件需求预测是有效的、可行的。     

Bayesian inference based on partial monitoring of components with applications to preventive system maintenance

Consider a binary, monotone system of n components. The assessment of the parameter vector, θ, of the joint distribution of the lifetimes of the components and hence of the reliability of the system is often difficult due to scarcity of data. It is therefore important to make use of all information in an efficient way. For instance, prior knowledge is often of importance and can indeed conveniently be incorporated by the Bayesian approach. It may also be important to continuously extract information from a system currently in operation. This may be useful both for decisions concerning the system in operation as well as for decisions improving the components or changing the design of similar new systems. As in Meilijson [12], life‐monitoring of some components and conditional life‐monitoring of some others is considered. In addition to data arising from this monitoring scheme, so‐called autopsy data are observed, if not censored. The probabilistic structure underlying this kind of data is described, and basic likelihood formulae are arrived at. A thorough discussion of an important aspect of this probabilistic structure, the inspection strategy, is given. Based on a version of this strategy a procedure for preventive system maintenance is developed and a detailed application to a network system presented. All the way a Bayesian approach to estimation of θ is applied. For the special case where components are conditionally independent given θ with exponentially distributed lifetimes it is shown that the weighted sum of products of generalized gamma distributions, as introduced in Gåsemyr and Natvig [7], is the conjugate prior for θ. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 551–577, 2001.     

支持向量机规则提取

支持向量机是一种黑箱模型,其学习到的知识蕴含在决策函数中,不仅影响了用户对利用支持向量机技术构建智能系统的信心,还阻碍了支持向量机技术在数据挖掘领域的应用。由于对支持向量机规则提取进行研究有助于解决上述问题,因此该领域正成为机器学习和智能计算界的研究热点。分析了具有代表性的支持向量机规则提取算法,并提出该领域未来的研究重点。     

A note on “resource flexibility with responsive pricing”

We revisit the capacity investment decision problem studied in the article “Resource Flexibility with Responsive Pricing” by Chod and Rudi [Operations Research 53, (2005) 532–548]. A monopolist firm producing two dependent (substitutable or complementary) products needs to determine the capacity of one flexible resource under demand risk so as to maximize its expected profit. Product demands are linear functions of the prices of both products, and the market potentials are random and correlated. We perform a comparative statics analysis on how demand variability and correlation impact the optimal capacity and the resulting expected profit. In particular, C&R study this problem under the following assumptions/approximations: (i) demand intercepts follow a bivariate Normal distribution; (ii) demand uncertainty is of an additive form; (iii) and under approximate expressions for the optimal capacity and optimal expected profit. We revisit Propositions 2, 3, 4, 5, and 10 of C&R without these assumptions and approximations, and show that these results continue to hold (i) for the exact expressions for the optimal expected profit and optimal capacity, and (ii) under any arbitrary continuous distribution of demand intercepts. However, we also show that the additive demand uncertainty is a critical assumption for the C&R results to hold. In particular, we provide a case of multiplicative uncertainty under which the C&R results (Propositions 2 and 3) fail. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 2010     

Scheduling parallel dedicated machines with the speeding‐up resource

We consider a problem of scheduling jobs on m parallel machines. The machines are dedicated, i.e., for each job the processing machine is known in advance. We mainly concentrate on the model in which at any time there is one unit of an additional resource. Any job may be assigned the resource and this reduces its processing time. A job that is given the resource uses it at each time of its processing. No two jobs are allowed to use the resource simultaneously. The objective is to minimize the makespan. We prove that the two‐machine problem is NP‐hard in the ordinary sense, describe a pseudopolynomial dynamic programming algorithm and convert it into an FPTAS. For the problem with an arbitrary number of machines we present an algorithm with a worst‐case ratio close to 3/2, and close to 3, if a job can be given several units of the resource. For the problem with a fixed number of machines we give a PTAS. Virtually all algorithms rely on a certain variant of the linear knapsack problem (maximization, minimization, multiple‐choice, bicriteria). © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Inventory cost impact of order processing priorities based on demand uncertainty

We evaluate an approach to decrease inventory costs at retail inventory locations that share a production facility. The retail locations sell the same product but differ in the variance of retail demand. Inventory policies at retail locations generate replenishment orders for the production facility. The production facility carries no finished goods inventory. Thus, production lead time for an order is the sojourn time in a single server queueing system. This lead time affects inventory costs at retail locations. We examine the impact of moving from a First Come First Served (FCFS) production rule for orders arriving at the production facility to a rule in which we provide non‐preemptive priority (PR) to orders from retail locations with higher demand uncertainty. We provide three approximations for the ratio of inventory costs under PR and FCFS and use them to identify conditions under which PR decreases retail inventory costs over FCFS. We then use a Direct Approach to establish conditions when PR decreases retail inventory costs over FCFS. We extend the results to orders from locations that differ in the mean and variance of demand uncertainty. The analysis suggests that tailoring lead times to product demand characteristics may decrease system inventory costs. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 376–390, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10016